Yamatake AVP300 Smart Valve Positioner 300 Series
Yamatake AVP300-MSD1A Smart Valve Positioner 300 Series
Easy to use
Auto setup:
The auto-setup function is a fully-automatic configuration program which specifies the actuator and adjusts the zero and span of the valve.
The program can be turned on simply from an external switch so that adjustments to the valve can be performed quickly and safely in hazardous areas.
High reliability
Positive seating:
The positive seating function completely shuts off the valve if the input signal becomes lower than previously set. This in turn enhances the full shut-off capabilities of the valves. Travel transmission
The model AVP301 transmits a 4-20 mA signal proportional to the valve travel. The valve travel can be monitored from the control room.
Specifition:
1.With HART communicating instrument
2.Handheld Field Communicator.
3.Easy to use. 4.Traditional 4-20 mA Systems.
Effective maintenance
• With the full ability to configure, a single SVP model can satisfy most requirements
• Self-diagnostic of the SVP permit monitoring the valve’s dynamic operation remotely for earlier detection of deterioration of failure. HART communication protocol
• This model (AVP300) uses HART communication protocol for its calibration, configuration and monitoring