proximity sensor

Omron Proximity Sensor E2K-C Series

 

 

Omron Proximity Sensor E2K-C

The metal heads of the E2EF achieve the same distances for

the same sizes as the E2E Proximity Sensors with Resin Heads.

This allows you to use Proximity Sensors that withstand

friction with the workpiece without major changes to

mounting brakets.

The 0.4-mm metal head exhibits almost no wear due to

friction with the workpiece or cleaning with metal brushes.

This helps prevent equipment down time due to sensor failure

and reduces the frequency of replacement.

Spatter-resistant models with fluororesin-coated head are

also available.

Reduces adhesion of spatter to achieve stable detection.

The tough all-stainless steel housing with a flame-retardant

cable enables reliable application where spatter is present

near welding machines.

Main information

Omron Proximity Sensor E2K-C

Sensing object

Ambient temperature range

Dielectric strength

Degree of protection

Ferrous metal (The sensing distance decreases with non-

ferrous metal.

Refer to Engineering Data on Data Sheet.)

Operating: − 10 to 70 °C, Storage: − 25 to 70 °C (with no

icing or condensation)

1,000 VAC, 50/60 Hz for 1 minute between current-carrying

parts and case

IEC 60529 IP67

CAD:
Product Type Product Overview CAD Download

E2K-C20MC1 Noise-Resistant Model, DC 3-Wire Model, Sensing

Distance 3 to 20mm, Operation Mode NO 2D / 3D

E2K-C20MC2 Noise-Resistant Model, DC 3-Wire Model, Sensing

Distance 3 to 20mm, Operation Mode NC 2D / 3D

E2K-C20MT1 Noise-Resistant Model, AC / DC 2-Wire Model,

Sensing Distance 3 to 20mm, Operation Mode NO 2D / 3D

E2K-C20MT2 Noise-Resistant Model, AC / DC 2-Wire Model,

Sensing Distance 3 to 20mm, Operation Mode NC 2D / 3D