proximity sensor

Omron Proximity Sensor E2C-EDA Series

Omron Proximity Sensor E2C-EDA

The metal heads of the E2EF achieve the same distances for

the same sizes as the E2E Proximity Sensors with Resin Heads.

This allows you to use Proximity Sensors that withstand

friction with the workpiece without major changes to

mounting brakets.

The 0.4-mm metal head exhibits almost no wear due to

friction with the workpiece or cleaning with metal brushes.

This helps prevent equipment down time due to sensor failure

and reduces the frequency of replacement.

Spatter-resistant models with fluororesin-coated head are

also available. Reduces adhesion of spatter to achieve

stable detection. The tough all-stainless steel housing with

a flame-retardant cable enables reliable application where

spatter is present near welding machines.

Features:
Can be selected according to the type of sensor probe type,

sensor preamplifier – between the use of anti-bending cable amplifier

Not susceptible to ambient temperature, the temperature

characteristics of 0.08% / ° C (φ5.4 type)

Can be simple, really check the set micron-level accuracy

(teaching function)

Can confirm the detection margin (digital display)

High-precision positioning, support for screening checks,

maximize the amount of change “FP (Fine Positioning) function”

E2C-EDA0 model for EtherCAT sensor communication unit /

CompoNet communication unit is also available

Main information

Omron Proximity Sensor E2C-EDA

Sensing object
Ambient temperature range

Dielectric strength
Degree of protection

Ferrous metal (The sensing distance decreases with non-

ferrous metal. Refer to Engineering Data on Data Sheet.)

Operating: − 10 to 70 °C, Storage: − 25 to 70 °C (with no icing or condensation)

1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case

IEC 60529 IP67