proximity sensor

New and Original Omron E2Q2 proximity sensor Series

Features:

The detection direction can be changed in front, side (up

and down, left and right 90 ° units)

Can be installed like a sense of the limit switch

species:
Ontology

DC type

Shape detection distance model

Output type NPN NO + NC

(Dual output) output form PNP NO + NC
(Dual output)

Shielding
463_Lu_1_1
463_Lu_1_3
20mm E2Q2-N20E3-H E2Q2-N20F3-H

Unshielded
463_Lu_1_2
30mm E2Q2-N30ME3-H E2Q2-N30MF3-H
Exchange type

Shape detection distance model

Operation mode NO / NC (switching type)
Shielding
463_Lu_1_1
463_Lu_1_3
15mm E2Q2-N15Y4-H
Unshielded
463_Lu_1_2
30mm E2Q2-N30MY4-H
Accessories (sold separately)

Cable clamp (ST type) <Recommended> [Products produced by kmecs Co., Ltd.]

Item No. Screw size SW C D Suitable for cable diameter φ

ST-M20 × 1.5 M20 × 1.5 25 37 9 7 ~ 13
Suitable for rubber gaskets
GPM20

Rating / Performance:

Information Update: April 1, 2013

Shielded / unshielded shielded unshielded shielded unshielded

Model E2Q2-N20 □ 3-H E2Q2-N30M □ 3-H E2Q2-N15Y4-H E2Q2-N30MY4-H

Detection distance 20mm ± 10% 30mm ± 10% 15mm ± 10% 30mm ± 10%

Set the distance 0 ~ 16mm 0 ~ 24mm 0 ~ 12mm 0 ~ 24mm

Should be less than 15% of the detection distance

Detection object Magnetic metal (non-magnetic metal

detection distance is reduced) See Catalog “Characteristic data”

Standard detection object iron 60 × 60 × 1mm iron 90 × 90 × 1mm iron 60 × 60 × 1mm iron 90 × 90 × 1mm

Response frequency 150Hz 100Hz 20Hz

voltage
(Use voltage range) DC12 ~ 48V Ripple (p-p) 10% or less

(DC10 ~ 60V) AC24 ~ 240V (AC20 ~ 253V) 50 / 60Hz

Current consumption / leakage current 20mA or less 1.7mA or less See the “Characteristic data”

Control output switch capacity 200mA or less 8 ~ 500mA

Residual voltage 3V or less (when load current is 200mA) See “Characteristic data”

Indicator Power display (green), detection display (yellow)

Power display (green), action display (yellow)
Action mode

(Close to the detection of objects) E3 type: NPN NO + NC, F3 type: PNP NO + NC

For details, refer to “Input Output Section Circuit Diagram”

in the catalog
Timing diagram

AC: NO / NC switching type

For details, refer to “Input Output Section Circuit Diagram” in the catalog

Timing diagram

Protection circuit reverse protection, load short circuit protection

Ambient temperature work: -25 ~ +70 ℃, save: -40 ~ +70 ℃ (no icing, condensation)

Ambient humidity Operating: 35 ~ 85% RH Storage: 35 ~ 95% RH (no condensation)

Effect of temperature Shield type -25 ~ +70 ℃ temperature range +23 ℃, the detection distance of ± 10%

Unshielded -25 ~ + 70 ℃ temperature range +23 ℃, the detection distance of ± 15%

Voltage within ± 10% of the rated power supply voltage

within the rated power supply voltage within ± 2% of the detection distance

Insulation resistance 50MΩ or more (DC500V megger) The

charging unit is integral with the housing

Withstand voltage E □ type, F □ type: AC1,000V 50 / 60Hz

1min charging part between the whole and the shell

Y type: AC4,000V 50 / 60Hz 1min The charging part is between the whole and the shell

Vibration (durable) 10 ~ 55Hz up and down amplitude 1.5mm X, Y, Z direction 2h

Impact (durable) 500m / s2 X, Y, Z direction 10 times

Protection structure IEC standard IP67 *

Connection type terminal block type

Quality about 240g
Material housing PBT

Terminal block PBT
Detection surface PBT

* When using the recommended cable clamp